Skip to content

iRidi cabinets for electrical and low-voltage equipment

iRidi cabinets for electrical and low-voltage equipment (ШУСТО 3.0) make automation system installation convenient and attractive. An ideal solution for mounting power supply, automation and low-voltage devices on DIN rails.

iRidi cabinet

Installation with style and ease

A key advantage of iRidi cabinets is the choice of four heights—17U, 35U, 47U and 55U—and a wide range of mounting components.

Two parallel mounting planes and three cable-routing zones make it possible to arrange and connect different types of equipment efficiently.

Installation with style and ease
Convenient, stylish and modern

Convenient, stylish and modern

The cabinet body is made of 1.5 mm steel and protected by a durable noir-effect polymer coating. This preserves its appearance and ensures a long service life.

Convenient modular design

The cabinets can be installed in standard electrical enclosures, furniture housings and 600 mm wide wall niches.

As an automation project grows, the demountable cabinet structure can be expanded by replacing the rails or adding modules.

Convenient modular design

ШУСТО mounting rail

The structural rails form two mounting planes and a cable-routing channel, providing secure module installation.

Perforations on the rear of the rail support vertical cable management.

ШУСТО mounting rail

Rail end caps

Rail end caps give the cabinet a finished appearance and form a rigid frame that physically protects the installed equipment.

Rail end caps
Decorative panels

Decorative panels

Decorative front panels cover the internal mounting space to form a protective faceplate. They prevent contact with live equipment parts and give the entire assembly a refined appearance.

Mounting heights: 1U, 2U and 3U.

Mounting panels

Mounting panels

Mounting panels hold non-standard equipment on either the outer or inner surface. Double perforations provide horizontal cable management.

Mounting heights: 1U and 2U.

Mounting panels with cable entry

Mounting panels with cable entry hold non-standard equipment on either the outer or inner surface. Double perforations provide horizontal cable management.

Mounting height: 1U.

Mounting panels with cable entry

19-inch DIN rail

The 19-inch DIN rails for standard equipment have a reinforced 15 mm deep structure. Perforations on the rear provide horizontal cable management.

Mounting height: 1U.

19-inch DIN rail
Frame for 19 Krone LSA Plus blocks, size 10-2

Frame for 19 Krone LSA Plus blocks, size 10-2

Double perforations provide horizontal cable management. A cable-entry opening allows the frame to form a cross-connect with capacity for 190 wire pairs and a termination density of 15.2 conductors per 1U. This is 45% higher than with three-tier 2.5 mm² terminal blocks on a DIN rail.

Frame for 19 Krone LSA Plus blocks, size 8-2

Frame for 19 Krone LSA Plus blocks, size 8-2

Double perforations provide horizontal cable management. A cable-entry opening allows the frame to form a cross-connect with capacity for 152 wire pairs and a termination density of 12.2 conductors per 1U. This is 16% higher than with three-tier 2.5 mm² terminal blocks on a DIN rail.

Centre-mounted shelf

The centre-mounted shelf attaches behind the vertical profiles to the structural rails. It holds non-standard equipment such as Wi-Fi routers, batteries and other devices.

Mounting height: 1U; depth: 180 mm.

Centre-mounted shelf

Fasteners

The fasteners are used to assemble cabinet components.

The front panels are attached to the cabinet rails with bolt sets whose noir-effect polymer coating matches the cabinet frame.

Fasteners